BIT3100-7 Bio Adhesive
More than eighteen trillion pounds of plastic have been produced to date, and eighteen billion pounds of plastic flows into the ocean every year. It ensnares the marine animals we cherish and the fish we put on our plates, it appears in the table salt we use, and it’s even found in our own bodies.
As more research on the impact of using so much plastic comes to light, consumers and manufacturers are left scrambling for an alternative to the ubiquitous material, and bioplastics have emerged as a potential alternative.
What is bioplastic? Bioplastic simply refers to plastic made from plant or vegetable biological material instead of petroleum. It is also often called bio-based plastic.
It can either be made from plants like corn and sugarcane, or it can be made from microorganisms. Bioplastic is commonly used in food packaging, medical devices. It can either be made from plants like corn and sugarcane, or it can be made from microorganisms. Bioplastic is commonly used in food packaging, medical devices. But today BIOCYQ start bring Bioplastic into digital printing industry. It will help our customer avoid plastic pollution and hazards. Our product uses PLA, PBAT and PHA bio formula, which can be decomposed into harmless substances by microorganisms.
BIOCYQ bioplastic printing materials advantage:
1. 15% stronger than other bio-resins film products
2. 100% biodegradable and compostable according to EN 13432, ASTM D6400
3. Grease resistant, Suited to applications where high speed printing using UV, HP-Latex, Screen printing inks
4. Without Chlorine, Heavy metals, VOC, Dioxin, bis-phenol-A Phthalates.
5. Microbial compostable and biodegrade in earth
BIT3100-7 bio adhesive film is a compostable bio-based film without PVC, which has been engineered to meet a variety of indoor and outdoor graphic applications with Bio-degrade solution. BIT3100-7 is a premium, digitally inkjet printable film that captivates with superior color pop and conform-ability to tough textured surfaces, including brick and cinder-block.
Property | Measurement | Typical Value |
Caliper, face | 3.0 mil (75um) | |
Caliper, adhesive | 1.0mil (25 um) | |
Dimensional stability | <0.015”(0.4mm | |
Tensile at Yield | 4.0 - 8.0 lb/in (0.7-1.5 kg/cm) | |
Elongation | 200% min. | |
Gloss | Hunter Gloss @ 60 degrees | 90 GU |
Adhesion: | 90# StaFlat RS 15 min 24 hr 1 week | 2.0 lbs/in (350 N/m) 2.5 lbs/in (438 N/m) 3.5 Ibs/in (613 N/m) |
Flammability | FMVSS 302 ASTM E-84 | Self Extinguishing Class 1 or A rating |
Min. Application Temperature | 50°F(10°C) | |
Service Temperature | 50° to 180°F (-45° to 82° C) (Reasonable range of temperatures which would be expected under normal environmental conditions). | |
Chemical resistance | Resistant to most mild acids, alkalis, and salt solutions |
Contact: Mr. Frank
Phone: +86-13916115272
Tel: +86-2132500259
Add: 2nd Floor, No.2 Industrial Building, No.415 Gulang road, Shanghai, China